• WIN Shortbat back in-stock • Special offer • $25 off • 
  • WIN Shortbat back in-stock • Special offer • $25 off • 
  • WIN Shortbat back in-stock • Special offer • $25 off • 
  • WIN Shortbat back in-stock • Special offer • $25 off • 
  • WIN Shortbat back in-stock • Special offer • $25 off • 
Get Started
Quick Start Guide
/
Equipment Setup
BACK

Equipment Setup

Meta Quest 2 For instructions on setting up your Meta Quest 2, follow the link to the support page on the Meta website. Getting started with Meta Quest 2 Meta Quest 3 For instructions on setting up your Meta Quest 3, follow the link to the support page on the Meta website. Set up your Meta Quest 3

Before installing the WIN Reality VR app, make sure your system’s firmware is up-to-date. Updating your firmware on the Meta Quest

  1. Press the Oculus/Meta button on the Right Controller
  2. A toolbar will pop up. Click “Store”
  3. In the search bar, enter “Win Reality Baseball”
  4. On the App’s page, select “Get”
  5. After the app install is complete, you’ll be able to find WIN Reality inside your Library

warning: Before each training session and after 30 minutes of continued use, check the bat attachment to make sure it is tight. Failure to properly secure the controller could result in damage to the controller and items in your training environment.
Meta Quest 2 + Bat attachment v2 (Navy Blue)

  1. Insert the left controller into the bat attachment feeding the controller strap through the bottom of the bat attachment.
  2. Secure the hook and loop straps from the bat attachment around the halo of the controller.
  3. Place the bottom of the bat attachment with controller just above the handle of your bat. The top of the bat attachment typically fits around the lower part of the barrel. Secure the bat attachment with the straps. The top strap will typically fit tightly in the last position of the strap.

warning: Before each training session and after 30 minutes of continued use, check the bat attachment to make sure it is tight. Failure to properly secure the controller could result in damage to the controller and items in your training environment.
Meta Quest 2 + Bat attachment v3 (Black or Purple)

  1. Insert the left controller into the bat attachment feeding the controller strap through the bottom of the bat attachment.
  2. Attach the black straps to the rivets on either side of pocket that holds the controller on the bat attachment. The folds of the straps must be pointing away from the controller.
  3. Secure the hook and loop straps around the halo of the controller.
  4. Place the bottom of the bat attachment with controller just above the handle of your bat. The top of the bat attachment typically fits around the lower part of the barrel. Secure the bat attachment with the straps. The top strap will typically fit tightly in the last position of the strap.

WARNING: Before each training session and after 30 minutes of continued use, check the bat attachment to make sure it is tight. Failure to properly secure the controller could result in damage to the controller and items in your training environment.
Meta Quest 3 + Bat attachment v3 (Black or Purple)

  1. Insert the left controller into the bat attachment feeding the controller strap through the bottom of the bat attachment.
  2. Place the bottom of the bat attachment with controller just above the handle of your bat. The top of the bat attachment typically fits around the lower part of the barrel. Secure the bat attachment with the straps. The top strap will typically fit tightly in the last position of the strap.
  3. Secure the controller with the clear strap from the bat attachment

Calibrating your bat can only take place inside of a hitting drill. One you’ve selected a drill, you will be prompted to choose your hitting equipment.

Controller Only

  1. Select Controller Only mode and then select your pitcher. The rest of the calibration will take place on the virtual field. NOTE: You can recalibrate your bat by pushing the virtual bat through the Calibration icon at home plate.
  2. Once on-field, you’ll be able to change which controller the virtual bat is paired to. By default the experience uses the left controller. To switch controllers, bring the controller NOT currently paired with the bat into the grip of the virtual bat until it lights up blue. Then press the trigger on the controller YOU WANT paired to the bat. The virtual bat will switch controllers.
  3. To establish the length of your bat, move your free controller to be flush with the base of your paired controller. The grey ball at the base of the virtual bat will light up blue. Press and hold the trigger until the ball lights up orange and then release the trigger. This confirms the base of your bat.
  4. To set the length of the bat, move your free controller to the gray ball at the top of the virtual bat until it lights up blue. Press and hold the trigger until the ball turns orange. Move the controller (with the trigger held down) up or down to set the desired length. Release the trigger to confirm your bat length.

With Bat Attachment

  1. Select Bat Attachment mode and then select your pitcher. The rest of the calibration will take place on the virtual field. NOTE: You can recalibrate your bat by pushing the virtual bat through the Calibration icon at home plate.

  2. Once on-field, you’ll see an outline of the bat. To establish the length of your bat, move your free controller to be flush with the knob of your bat. The grey ball at the base of the virtual bat will light up blue. Press and hold the trigger until the ball lights up orange and then release the trigger. This confirms the location of the knob of your bat.
  3. To set the length of the bat, move your free controller to the gray ball at the top of the virtual bat until it lights up blue. Press and hold the trigger until the ball turns orange. Move the controller (with the trigger held down) up or down to meet the top of your actual bat. Release the trigger to confirm your bat length.
  4. When you’re done calibrating your bat length in VR, place the free controller away from your feet.

Warning: Before each training session and after 30 minutes of continued use, check the short bat collar and side clamp to make sure they are tight. Failure to properly secure the controller could result in damage to the controller and items in your training environment.

  1. Loosen the collar at the top of the bat and insert the left controller. Make sure the controller strap feeds through the hole just below the collar.
  2. Push the left controller down until the side button is fully depressed
  3. Screw down the collar until it is fully tightened and can no longer turn. We recommend having an adult assist with this step.
  4. Secure the controller strap with the short bat side clamp. Screw it down until it is fully tight.